[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6
.24-19.41-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f66d800 (usable)
[ 0.000000] BIOS-e820: 000000007f66d800 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 521837) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 521837
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 521837
[ 0.000000] On node 0 totalpages: 521837
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2284 pages used for memmap
[ 0.000000] HighMem zone: 290177 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FBC60 checksum 0
[ 0.000000] ACPI: RSDP 000FBC60, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 7F66F200, 0064 (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: FACP 7F66F09C, 00F4 (r4 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: DSDT 7F66F800, 5495 (r2 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS 7F67E000, 0040
[ 0.000000] ACPI: HPET 7F66F300, 0038 (r1 DELL M08 1 ASL 61)
[ 0.000000] ACPI: APIC 7F66F400, 0068 (r1 DELL M08 27D8030A ASL 47)
[ 0.000000] ACPI: MCFG 7F66F3C0, 003E (r16 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: SLIC 7F66F49C, 0176 (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: OSFR 7F66EA00, 008A (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: BOOT 7F66EFC0, 0028 (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: SSDT 7F66DA02, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761
[ 0.000000] Kernel command line: root=UUID=89cc3dc0-c7c5-4d52-b5e0-f1822054b891 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.137 MHz processor.
[ 9.924691] Console: colour VGA+ 80x25
[ 9.924695] console [tty0] enabled
[ 9.925042] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.925350] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.016614] Memory: 2057520k/2087348k available (2177k kernel code, 28632k reserved, 1006k data, 368k init, 1169844k highmem)
[ 10.016621] virtual kernel memory layout:
[ 10.016622] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 10.016623] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.016624] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 10.016625] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 10.016626] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 10.016627] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
[ 10.016628] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 10.016631] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.016675] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 10.016827] hpet clockevent registered
[ 10.096800] Calibrating delay using timer specific routine.. 3462.19 BogoMIPS (lpj=6924399)
[ 10.096825] Security Framework initialized
[ 10.096832] SELinux: Disabled at boot.
[ 10.096847] AppArmor: AppArmor initialized
[ 10.096851] Failure registering capabilities with primary security module.
[ 10.096859] Mount-cache hash table entries: 512
[ 10.096993] Initializing cgroup subsys ns
[ 10.096999] Initializing cgroup subsys cpuacct
[ 10.097009] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 10.097017] monitor/mwait feature present.
[ 10.097018] using mwait in idle threads.
[ 10.097022] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.097025] CPU: L2 cache: 1024K
[ 10.097028] CPU: Physical Processor ID: 0
[ 10.097029] CPU: Processor Core ID: 0
[ 10.097031] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 10.097041] Compat vDSO mapped to ffffe000.
[ 10.097054] Checking 'hlt' instruction... OK.
[ 10.113190] SMP alternatives: switching to UP code
[ 10.114834] Early unpacking initramfs... done
[ 10.447078] ACPI: Core revision 20070126
[ 10.447125] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.452253] CPU0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz stepping 0d
[ 10.452270] SMP alternatives: switching to SMP code
[ 10.453013] Booting processor 1/1 eip 3000
[ 10.463126] Initializing CPU#1
[ 10.540604] Calibrating delay using timer specific routine.. 3374.45 BogoMIPS (lpj=6748918)
[ 10.540611] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 10.540616] monitor/mwait feature present.
[ 10.540619] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.540621] CPU: L2 cache: 1024K
[ 10.540623] CPU: Physical Processor ID: 0
[ 10.540624] CPU: Processor Core ID: 1
[ 10.540626] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 10.541045] CPU1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz stepping 0d
[ 10.541068] Total of 2 processors activated (6836.65 BogoMIPS).
[ 10.541270] ENABLING IO-APIC IRQs
[ 10.541465] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.688655] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 10.708664] Brought up 2 CPUs
[ 10.708687] CPU0 attaching sched-domain:
[ 10.708690] domain 0: span 03
[ 10.708692] groups: 01 02
[ 10.708695] CPU1 attaching sched-domain:
[ 10.708696] domain 0: span 03
[ 10.708698] groups: 02 01
[ 10.708911] net_namespace: 64 bytes
[ 10.708921] Booting paravirtualized kernel on bare hardware
[ 10.709378] Time: 5:20:36 Date: 08/31/08
[ 10.709405] NET: Registered protocol family 16
[ 10.709585] EISA bus registered
[ 10.709590] ACPI: bus type pci registered
[ 10.721474] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=13
[ 10.721476] PCI: Using configuration type 1
[ 10.721491] Setting up standard PCI resources
[ 10.729805] ACPI: EC: Look up EC in DSDT
[ 10.729940] ACPI: BIOS _OSI(Linux) query ignored
[ 10.729943] ACPI: DMI System Vendor: Dell Inc.
[ 10.729944] ACPI: DMI Product Name: Inspiron 1525
[ 10.729946] ACPI: DMI Product Version:
[ 10.729947] ACPI: DMI Board Name: 0U990C
[ 10.729949] ACPI: DMI BIOS Vendor: Dell Inc.
[ 10.729950] ACPI: DMI BIOS Date: 03/10/2008
[ 10.729952] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 10.729954] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 10.739465] ACPI: Interpreter enabled
[ 10.739469] ACPI: (supports S0 S3 S4 S5)
[ 10.739482] ACPI: Using IOAPIC for interrupt routing
[ 10.760638] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.761748] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 10.761753] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 10.763246] PCI: Transparent bridge - 0000:00:1e.0
[ 10.763296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.763763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 10.763919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 10.764041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 10.764161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 10.775632] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 10.775749] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 10.775863] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[ 10.775965] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[ 10.776080] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 10.776196] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 10.776312] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 10.776417] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 10.776567] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.776596] pnp: PnP ACPI init
[ 10.776604] ACPI: bus type pnp registered
[ 10.817611] pnpacpi: exceeded the max number of mem resources: 12
[ 10.817821] pnp: PnP ACPI: found 13 devices
[ 10.817823] ACPI: ACPI bus type pnp unregistered
[ 10.817827] PnPBIOS: Disabled by ACPI PNP
[ 10.818039] PCI: Using ACPI for IRQ routing
[ 10.818041] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.912455] NET: Registered protocol family 8
[ 10.912457] NET: Registered protocol family 20
[ 10.912490] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.912494] hpet0: 3 64-bit timers, 14318180 Hz
[ 10.913535] AppArmor: AppArmor Filesystem Enabled
[ 10.916447] Time: tsc clocksource has been installed.
[ 10.916456] Switched to high resolution mode on CPU 0
[ 10.916566] Switched to high resolution mode on CPU 1
[ 10.932431] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved
[ 10.932435] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved
[ 10.932444] system 00:06: ioport range 0xc80-0xcff could not be reserved
[ 10.932452] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[ 10.932457] system 00:0a: ioport range 0x900-0x97f has been reserved
[ 10.932460] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 10.932463] system 00:0a: ioport range 0x1000-0x1005 has been reserved
[ 10.932465] system 00:0a: ioport range 0x1008-0x100f has been reserved
[ 10.932471] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 10.932474] system 00:0b: ioport range 0x1006-0x1007 has been reserved
[ 10.932476] system 00:0b: ioport range 0x100a-0x1059 could not be reserved
[ 10.932479] system 00:0b: ioport range 0x1060-0x107f has been reserved
[ 10.932481] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 10.932484] system 00:0b: ioport range 0x10c0-0x10df has been reserved
[ 10.932486] system 00:0b: ioport range 0x1010-0x102f has been reserved
[ 10.932489] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 10.932495] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 10.932498] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[ 10.932501] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 10.932504] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 10.932506] system 00:0c: iomem range 0x100000-0x7f66d7ff could not be reserved
[ 10.932509] system 00:0c: iomem range 0x7f66d800-0x7f6fffff could not be reserved
[ 10.932512] system 00:0c: iomem range 0x7f700000-0x7f7fffff could not be reserved
[ 10.932515] system 00:0c: iomem range 0x7f700000-0x7fefffff could not be reserved
[ 10.932517] system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
[ 10.932520] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[ 10.932523] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 10.932526] system 00:0c: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 10.962933] PCI: Bridge: 0000:00:1c.0
[ 10.962937] IO window: d000-dfff
[ 10.962944] MEM window: fe800000-fe8fffff
[ 10.962949] PREFETCH window: disabled.
[ 10.962955] PCI: Bridge: 0000:00:1c.1
[ 10.962957] IO window: disabled.
[ 10.962963] MEM window: fe700000-fe7fffff
[ 10.962968] PREFETCH window: disabled.
[ 10.962974] PCI: Bridge: 0000:00:1c.4
[ 10.962977] IO window: c000-cfff
[ 10.962984] MEM window: fe400000-fe6fffff
[ 10.962989] PREFETCH window: f0000000-f01fffff
[ 10.962996] PCI: Bridge: 0000:00:1e.0
[ 10.962997] IO window: disabled.
[ 10.963003] MEM window: fe300000-fe3fffff
[ 10.963008] PREFETCH window: disabled.
[ 10.963046] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.963053] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.963081] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 10.963088] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.963114] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.963120] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 10.963136] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.963148] NET: Registered protocol family 2
[ 11.000435] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.000674] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 11.001189] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.001553] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.001556] TCP reno registered
[ 11.012543] checking if image is initramfs... it is
[ 11.665061] Freeing initrd memory: 7315k freed
[ 11.665226] Simple Boot Flag at 0x79 set to 0x1
[ 11.665832] audit: initializing netlink socket (disabled)
[ 11.665846] audit(1220160036.525:1): initialized
[ 11.666053] highmem bounce pool size: 64 pages
[ 11.667912] VFS: Disk quotas dquot_6.5.1
[ 11.667986] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.668113] io scheduler noop registered
[ 11.668115] io scheduler anticipatory registered
[ 11.668117] io scheduler deadline registered
[ 11.668137] io scheduler cfq registered (default)
[ 11.668148] Boot video device is 0000:00:02.0
[ 11.668396] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.668463] assign_interrupt_mode Found MSI capability
[ 11.668519] Allocate Port Service[0000:00:1c.0:pcie00]
[ 11.668556] Allocate Port Service[0000:00:1c.0:pcie02]
[ 11.668670] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 11.668736] assign_interrupt_mode Found MSI capability
[ 11.668788] Allocate Port Service[0000:00:1c.1:pcie00]
[ 11.668818] Allocate Port Service[0000:00:1c.1:pcie02]
[ 11.668926] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 11.668992] assign_interrupt_mode Found MSI capability
[ 11.669045] Allocate Port Service[0000:00:1c.4:pcie00]
[ 11.669075] Allocate Port Service[0000:00:1c.4:pcie02]
[ 11.669330] isapnp: Scanning for PnP cards...
[ 12.023767] isapnp: No Plug & Play device found
[ 12.047742] Real Time Clock Driver v1.12ac
[ 12.047890] hpet_resources: 0xfed00000 is busy
[ 12.047950] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.049092] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.049158] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 12.049251] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.066637] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.078852] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.078856] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.078859] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.078861] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.078863] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.088031] mice: PS/2 mouse device common for all mice
[ 12.088145] EISA: Probing bus 0 at eisa.0
[ 12.088154] Cannot allocate resource for EISA slot 1
[ 12.088187] EISA: Detected 0 cards.
[ 12.088190] cpuidle: using governor ladder
[ 12.088191] cpuidle: using governor menu
[ 12.088274] NET: Registered protocol family 1
[ 12.088302] Using IPI No-Shortcut mode
[ 12.088331] registered taskstats version 1
[ 12.088463] Magic number: 4:142:316
[ 12.088525] hash matches device tty41
[ 12.088552] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 12.088554] EDD information not available.
[ 12.088744] Freeing unused kernel memory: 368k freed
[ 12.110667] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 13.370012] fuse init (API version 7.9)
[ 13.389751] ACPI: SSDT 7F66E538, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 13.389958] ACPI: SSDT 7F66DECE, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 13.390504] Monitor-Mwait will be used to enter C-1 state
[ 13.390507] Monitor-Mwait will be used to enter C-2 state
[ 13.390509] Monitor-Mwait will be used to enter C-3 state
[ 13.390632] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.390637] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 13.390849] ACPI: SSDT 7F66E77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 13.391038] ACPI: SSDT 7F66E4B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 13.391802] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 13.391807] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 13.393241] ACPI: Thermal Zone [THM] (52 C)
[ 13.810319] usbcore: registered new interface driver usbfs
[ 13.810343] usbcore: registered new interface driver hub
[ 13.810824] SCSI subsystem initialized
[ 13.818110] usbcore: registered new device driver usb
[ 13.818202] libata version 3.00 loaded.
[ 13.821185] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
[ 13.821202] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 13.821207] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 13.821493] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 13.825406] ehci_hcd 0000:00:1a.7: debug port 1
[ 13.825414] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 13.825425] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfed1c400
[ 13.829868] USB Universal Host Controller Interface driver v3.0
[ 13.840272] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.840401] usb usb1: configuration #1 chosen from 1 choice
[ 13.840429] hub 1-0:1.0: USB hub found
[ 13.840436] hub 1-0:1.0: 4 ports detected
[ 13.944379] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 13.944396] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 13.944401] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.944424] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 13.948332] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.948340] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 13.948350] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000
[ 13.964223] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.964344] usb usb2: configuration #1 chosen from 1 choice
[ 13.964368] hub 2-0:1.0: USB hub found
[ 13.964374] hub 2-0:1.0: 6 ports detected
[ 14.068424] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 14.068438] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 14.068442] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 14.068474] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 14.068505] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20
[ 14.068623] usb usb3: configuration #1 chosen from 1 choice
[ 14.068646] hub 3-0:1.0: USB hub found
[ 14.068650] hub 3-0:1.0: 2 ports detected
[ 14.172256] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 14.172269] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 14.172274] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 14.172302] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 14.172336] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00
[ 14.172452] usb usb4: configuration #1 chosen from 1 choice
[ 14.172475] hub 4-0:1.0: USB hub found
[ 14.172479] hub 4-0:1.0: 2 ports detected
[ 14.276236] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 14.276250] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.276255] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.276280] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 14.276313] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80
[ 14.276434] usb usb5: configuration #1 chosen from 1 choice
[ 14.276461] hub 5-0:1.0: USB hub found
[ 14.276466] hub 5-0:1.0: 2 ports detected
[ 14.380183] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 14.380196] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.380201] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.380227] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 14.380257] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60
[ 14.380381] usb usb6: configuration #1 chosen from 1 choice
[ 14.380404] hub 6-0:1.0: USB hub found
[ 14.380409] hub 6-0:1.0: 2 ports detected
[ 14.484121] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 18
[ 14.484136] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.484142] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.484169] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 14.484202] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006f40
[ 14.484321] usb usb7: configuration #1 chosen from 1 choice
[ 14.484344] hub 7-0:1.0: USB hub found
[ 14.484349] hub 7-0:1.0: 2 ports detected
[ 14.588314] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.638945] Clocksource tsc unstable (delta = -9090200934 ns)
[ 14.641095] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 14.643093] Time: hpet clocksource has been installed.
[ 14.653190] ahci 0000:00:1f.2: version 3.0
[ 14.653224] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.653282] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports
[ 14.653285] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
[ 14.703668] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 14.703673] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 14.703680] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 14.703966] scsi0 : ahci
[ 14.704247] scsi1 : ahci
[ 14.704400] scsi2 : ahci
[ 14.704668] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 220
[ 14.704672] ata2: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb980 irq 220
[ 14.704676] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 220
[ 14.715451] ieee1394: Host added: ID:BUS[0-00:1023] GUID[424fc00000ca51a1]
[ 14.740228] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 14.743435] ata1.00: ATA-7: ST9160821AS, 3.CDE, max UDMA/133
[ 14.743438] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 14.748997] ata1.00: configured for UDMA/133
[ 14.759560] ata2: SATA link down (SStatus 0 SControl 0)
[ 14.768895] ata3: SATA link down (SStatus 0 SControl 300)
[ 14.769109] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.CD PQ: 0 ANSI: 5
[ 14.769487] ata_piix 0000:00:1f.1: version 2.12
[ 14.769505] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.769543] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.769622] scsi3 : ata_piix
[ 14.769781] scsi4 : ata_piix
[ 14.770421] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 14.770424] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 14.777694] Driver 'sd' needs updating - please use bus_type methods
[ 14.779828] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 14.779841] sd 0:0:0:0: [sda] Write Protect is off
[ 14.779843] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.779859] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.779907] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 14.779916] sd 0:0:0:0: [sda] Write Protect is off
[ 14.779919] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.779934] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.779938] sda: sda1 sda2 sda3 sda4 <>
[ 14.991320] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.996163] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.080178] ata4.00: ATAPI: Optiarc DVD+/-RW AD-5560A, DD11, max UDMA/33
[ 15.251976] ata4.00: configured for UDMA/33
[ 15.252074] ata5: port disabled. ignoring.
[ 15.253200] scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-5560A DD11 PQ: 0 ANSI: 5
[ 15.253283] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 15.264773] Driver 'sr' needs updating - please use bus_type methods
[ 15.272257] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 15.272261] Uniform CD-ROM driver Revision: 3.20
[ 15.272313] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 15.372257] Attempting manual resume
[ 15.372261] swsusp: Resume From Partition 8:5
[ 15.372263] PM: Checking swsusp image.
[ 15.372443] PM: Resume from disk failed.
[ 15.394643] kjournald starting. Commit interval 5 seconds
[ 15.394670] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.527182] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 24.540298] Linux agpgart interface v0.102
[ 24.624863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.665979] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.790037] iTCO_vendor_support: vendor-support=0
[ 24.827291] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 24.884797] agpgart: Detected an Intel 965GM Chipset.
[ 24.885343] agpgart: Detected 7676K stolen memory.
[ 24.899387] agpgart: AGP aperture is 256M @ 0xe0000000
[ 24.924090] input: Lid Switch as /devices/virtual/input/input3
[ 24.953862] ACPI: Lid Switch [LID]
[ 24.953932] input: Power Button (CM) as /devices/virtual/input/input4
[ 24.957554] input: PS/2 Mouse as /devices/virtual/input/input5
[ 25.011205] ACPI: Power Button (CM) [PBTN]
[ 25.011273] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 25.092191] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input7
[ 25.123155] ACPI: Sleep Button (CM) [SBTN]
[ 25.123326] ACPI: AC Adapter [AC] (on-line)
[ 25.152758] ACPI: Battery Slot [BAT0] (battery present)
[ 25.152838] ACPI: WMI-Acer: Mapper loaded
[ 25.327257] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 25.327301] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.327671] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 25.328646] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input8
[ 25.384043] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 25.384218] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9
[ 25.432043] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 25.605269] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 25.786918] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 25.786922] ricoh-mmc: Copyright(c) Philip Langdale
[ 26.227300] sdhci: Secure Digital Host Controller Interface driver
[ 26.227304] sdhci: Copyright(c) Pierre Ossman
[ 26.754757] ndiswrapper: driver bcmwl5 (Broadcom,09/20/2007, 4.170.25.12) loaded
[ 26.755115] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 26.755431] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[ 26.768314] ndiswrapper: using IRQ 17
[ 27.183474] wlan0: ethernet device 00:1f:3a:7e:fe:46 using NDIS driver: bcmwl5, version: 0x4aa190c, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4315.5.conf
[ 27.183573] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 27.183729] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 27.183761] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 27.236905] usbcore: registered new interface driver ndiswrapper
[ 27.540363] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.540381] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 27.540420] sky2 0000:09:00.0: v1.20 addr 0xfe8fc000 irq 16 Yukon-FE+ (0xb8) rev 0
[ 27.540917] sky2 eth0: addr 00:1d:09:52:f7:9d
[ 27.540941] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12)
[ 27.540957] ricoh-mmc: Controller is now disabled.
[ 27.541252] sdhci: SDHCI controller found at 0000:02:09.1 [1180:0822] (rev 22)
[ 27.541283] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 21
[ 27.541346] mmc0: SDHCI at 0xfe3ff400 irq 21 DMA
[ 27.745398] lp: driver loaded but no devices found
[ 27.873336] Adding 5245180k swap on /dev/sda5. Priority:-1 extents:1 across:5245180k
[ 28.213482] EXT3 FS on sda1, internal journal
[ 28.858744] kjournald starting. Commit interval 5 seconds
[ 28.858952] EXT3 FS on sda6, internal journal
[ 28.858957] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.388453] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.901629] No dock devices found.
[ 31.381851] apm: BIOS not found.
[ 31.526610] ppdev: user-space parallel port driver
[ 31.735996] audit(1220181668.618:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5170 profile="/usr/sbin/cupsd" namespace="default"
[ 33.163712] sky2 eth0: enabling interface
[ 33.280042] Bluetooth: Core ver 2.11
[ 33.280265] NET: Registered protocol family 31
[ 33.280268] Bluetooth: HCI device and connection manager initialized
[ 33.280273] Bluetooth: HCI socket layer initialized
[ 33.351618] Bluetooth: L2CAP ver 2.9
[ 33.351626] Bluetooth: L2CAP socket layer initialized
[ 33.447381] Bluetooth: RFCOMM socket layer initialized
[ 33.447791] Bluetooth: RFCOMM TTY layer initialized
[ 33.447799] Bluetooth: RFCOMM ver 1.8
[ 35.464499] ndiswrapper: device wlan0 removed
[ 35.464563] ACPI: PCI interrupt for device 0000:0b:00.0 disabled
[ 35.464705] usbcore: deregistering interface driver ndiswrapper
[ 35.530834] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 35.615866] ndiswrapper: driver bcmwl5 (Broadcom,09/20/2007, 4.170.25.12) loaded
[ 35.616378] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 35.616559] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[ 35.629197] ndiswrapper: using IRQ 17
[ 35.912725] wlan0: ethernet device 00:1f:3a:7e:fe:46 using NDIS driver: bcmwl5, version: 0x4aa190c, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4315.5.conf
[ 35.912855] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 35.931132] usbcore: registered new interface driver ndiswrapper
[ 36.882060] [drm] Initialized drm 1.1.0 20060810
[ 36.886587] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 36.886604] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 36.886718] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 47.763036] NET: Registered protocol family 10
[ 47.764119] lo: Disabled Privacy Extensions
[ 47.765333] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.766313] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 59.454895] CPU0 attaching NULL sched-domain.
[ 59.454902] CPU1 attaching NULL sched-domain.
[ 59.477522] CPU0 attaching sched-domain:
[ 59.477529] domain 0: span 03
[ 59.477531] groups: 01 02
[ 59.477534] CPU1 attaching sched-domain:
[ 59.477536] domain 0: span 03
[ 59.477537] groups: 02 01
[ 85.776080] NET: Registered protocol family 17
[ 86.341917] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 87.225881] wlan0: no IPv6 routers present
[ 97.112679] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 97.980628] wlan0: no IPv6 routers present
[ 112.964883] wlan0: no IPv6 routers present
[ 324.797163] sky2 eth0: disabling interface
[ 324.851665] ACPI: PCI interrupt for device 0000:09:00.0 disabled
[ 324.891561] ndiswrapper: device wlan0 removed
[ 324.891628] ACPI: PCI interrupt for device 0000:0b:00.0 disabled
[ 324.891773] usbcore: deregistering interface driver ndiswrapper
[ 326.418157] PM: suspend-to-disk mode set to 'platform'
[ 326.418274] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 326.418281] swsusp: Basic memory bitmaps created
[ 326.418283] Syncing filesystems ... done.
[ 326.418311] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 326.418862] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done.
[ 326.515108] Shrinking memory... done (31712 pages freed)
[ 326.750565] Freed 126848 kbytes in 0.52 seconds (243.93 MB/s)
[ 326.750567] Suspending console(s)
[ 326.751122] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 326.753597] ACPI: PCI interrupt for device 0000:02:09.1 disabled
[ 326.760305] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 326.760465] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 326.775928] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 326.775969] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 326.776010] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 326.784704] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 326.784921] ACPI: PCI interrupt for device 0000:00:1a.7 disabled
[ 326.785077] ACPI: PCI interrupt for device 0000:00:1a.1 disabled
[ 326.785118] ACPI: PCI interrupt for device 0000:00:1a.0 disabled
[ 326.790004] Disabling non-boot CPUs ...
[ 326.790023] CPU0 attaching NULL sched-domain.
[ 326.790025] CPU1 attaching NULL sched-domain.
[ 326.904912] CPU 1 is now offline
[ 326.904915] SMP alternatives: switching to UP code
[ 326.906314] CPU0 attaching sched-domain:
[ 326.906317] domain 0: span 01
[ 326.906318] groups: 01
[ 326.906540] CPU1 is down
[ 326.906794] swsusp: critical section:
[ 326.950849] swsusp: Need to copy 125877 pages
[ 326.950852] swsusp: Normal pages needed: 33029 + 1024 + 40, available pages: 196248
[ 34.181463] Enabling non-boot CPUs ...
[ 34.181530] CPU0 attaching NULL sched-domain.
[ 34.191607] SMP alternatives: switching to SMP code
[ 34.192738] Booting processor 1/1 eip 3000
[ 34.202830] Initializing CPU#1
[ 34.283468] Calibrating delay using timer specific routine.. 3457.81 BogoMIPS (lpj=6915633)
[ 34.283475] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 34.283480] monitor/mwait feature present.
[ 34.283483] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 34.283485] CPU: L2 cache: 1024K
[ 34.283487] CPU: Physical Processor ID: 0
[ 34.283488] CPU: Processor Core ID: 1
[ 34.283490] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 34.283958] CPU1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz stepping 0d
[ 34.283979] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 34.304004] CPU0 attaching sched-domain:
[ 34.304007] domain 0: span 03
[ 34.304008] groups: 01 02
[ 34.304011] CPU1 attaching sched-domain:
[ 34.304012] domain 0: span 03
[ 34.304013] groups: 02 01
[ 34.304333] CPU1 is up
[ 34.308166] Switched to high resolution mode on CPU 1
[ 34.359555] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.359563] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 34.359590] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 34.359596] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 34.359656] usb usb3: root hub lost power or was reset
[ 34.359678] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 34.359684] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 34.359742] usb usb4: root hub lost power or was reset
[ 34.360021] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
[ 34.360029] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 34.360083] usb usb1: root hub lost power or was reset
[ 34.363968] ehci_hcd 0000:00:1a.7: debug port 1
[ 34.363978] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 34.364182] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
[ 34.364210] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 34.364217] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 34.364312] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 34.364394] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 34.364474] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 34.364483] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 34.364489] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 34.364547] usb usb5: root hub lost power or was reset
[ 34.364566] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 34.364572] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 34.364630] usb usb6: root hub lost power or was reset
[ 34.364649] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 18
[ 34.364655] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 34.364713] usb usb7: root hub lost power or was reset
[ 34.364843] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 34.364850] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 34.364904] usb usb2: root hub lost power or was reset
[ 34.368809] ehci_hcd 0000:00:1d.7: debug port 1
[ 34.368820] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 34.368880] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 34.368968] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005)
[ 34.368980] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.368986] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 34.369029] ata4.00: _GTF evaluation failed (AE 0x1001)
[ 34.369083] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
[ 34.369180] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 34.369256] ata5: port disabled. ignoring.
[ 34.369340] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100107, writing 100103)
[ 34.369534] PM: Writing back config space on device 0000:0b:00.0 at offset 1 (was 100106, writing 100102)
[ 34.369783] PM: Writing back config space on device 0000:02:09.0 at offset 4 (was 0, writing fe3ff800)
[ 34.369789] PM: Writing back config space on device 0000:02:09.0 at offset 3 (was 800000, writing 804010)
[ 34.369797] PM: Writing back config space on device 0000:02:09.0 at offset 1 (was 2100000, writing 2100106)
[ 34.422394] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 34.428585] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 21
[ 34.428628] PM: Writing back config space on device 0000:02:09.2 at offset 4 (was fe3ff500, writing fe3ff600)
[ 34.428640] PM: Writing back config space on device 0000:02:09.2 at offset 0 (was 8431180, writing 5921180)
[ 34.428680] PM: Writing back config space on device 0000:02:09.3 at offset 4 (was fe3ff600, writing fe3ff700)
[ 34.428691] PM: Writing back config space on device 0000:02:09.3 at offset 0 (was 5921180, writing 8521180)
[ 34.428712] PM: Writing back config space on device 0000:02:09.4 at offset f (was 205, writing ffffffff)
[ 34.428717] PM: Writing back config space on device 0000:02:09.4 at offset e (was 0, writing ffffffff)
[ 34.428723] PM: Writing back config space on device 0000:02:09.4 at offset d (was 80, writing ffffffff)
[ 34.428729] PM: Writing back config space on device 0000:02:09.4 at offset c (was 0, writing ffffffff)
[ 34.428735] PM: Writing back config space on device 0000:02:09.4 at offset b (was 22f1028, writing ffffffff)
[ 34.428741] PM: Writing back config space on device 0000:02:09.4 at offset a (was 0, writing ffffffff)
[ 34.428747] PM: Writing back config space on device 0000:02:09.4 at offset 9 (was 0, writing ffffffff)
[ 34.428753] PM: Writing back config space on device 0000:02:09.4 at offset 8 (was 0, writing ffffffff)
[ 34.428759] PM: Writing back config space on device 0000:02:09.4 at offset 7 (was 0, writing ffffffff)
[ 34.428764] PM: Writing back config space on device 0000:02:09.4 at offset 6 (was 0, writing ffffffff)
[ 34.428770] PM: Writing back config space on device 0000:02:09.4 at offset 5 (was 0, writing ffffffff)
[ 34.428776] PM: Writing back config space on device 0000:02:09.4 at offset 4 (was fe3ff700, writing ffffffff)
[ 34.428782] PM: Writing back config space on device 0000:02:09.4 at offset 3 (was 804010, writing ffffffff)
[ 34.428788] PM: Writing back config space on device 0000:02:09.4 at offset 2 (was 8800012, writing ffffffff)
[ 34.428794] PM: Writing back config space on device 0000:02:09.4 at offset 1 (was 2100106, writing ffffffff)
[ 34.428800] PM: Writing back config space on device 0000:02:09.4 at offset 0 (was 8521180, writing ffffffff)
[ 34.471629] ata3: SATA link down (SStatus 0 SControl 300)
[ 34.471672] ata2: SATA link down (SStatus 0 SControl 0)
[ 34.515987] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.548773] ata1.00: configured for UDMA/133
[ 34.549517] ata4.00: configured for UDMA/33
[ 34.549820] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 34.549857] sd 0:0:0:0: [sda] Write Protect is off
[ 34.549860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 34.549939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.576278] sd 0:0:0:0: [sda] Starting disk
[ 34.673302] PM: Image restored successfully.
[ 34.716926] Restarting tasks ... done.
[ 34.720796] swsusp: Basic memory bitmaps freed
[ 34.943125] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 34.958812] ndiswrapper: driver bcmwl5 (Broadcom,09/20/2007, 4.170.25.12) loaded
[ 34.959209] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.959396] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[ 34.972139] ndiswrapper: using IRQ 17
[ 35.388680] wlan0: ethernet device 00:1f:3a:7e:fe:46 using NDIS driver: bcmwl5, version: 0x4aa190c, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4315.5.conf
[ 35.389197] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 35.392368] usbcore: registered new interface driver ndiswrapper
[ 35.418816] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.424799] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.424849] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 35.424895] sky2 0000:09:00.0: v1.20 addr 0xfe8fc000 irq 16 Yukon-FE+ (0xb8) rev 0
[ 35.425658] sky2 eth0: addr 00:1d:09:52:f7:9d
[ 35.462530] sky2 eth0: enabling interface
[ 35.467561] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.561258] sky2 eth0: disabling interface
[ 35.583450] sky2 eth0: enabling interface
[ 35.589617] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.618480] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.997304] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 44.273797] wlan0: no IPv6 routers present